A pressure cleaner, as the name implies, uses highly pressurized water to blast away dirt and grime. Most consumer pressure cleaners typically use a garden hose to spray water. However, a hot water pressure cleaner increases water temperature to improve cleaning performance.
The justification is simple: Hot water works better than cold water to remove tough stains like grease and oils. Additionally, it is more effective at eradicating bacteria and germs and takes less detergent in general to clean surfaces. Hot water pressure cleaners are typically marketed to commercial operators because they are bulkier than cold-water models. However, if they frequently clean labor sites or tools smeared in oil or grease, some DIYers decide to spend the money. Renting a hot water pressure cleaner is also a better option if you only need it for a single project.
A power washer is the name of a hot water pressure cleaner in several parts of the nation. In other contexts, homeowners and professionals alike interchange the terms “power cleaner” with “pressure cleaner.” We’ll refer to it as a hot water pressure cleaner for clarity.
What Is the Process of a Hot Water Pressure Cleaner?
Like a typical home water heater, a hot water pressure cleaner operates. The local water supply in a home or the pressure cleaner’s pump is examples of external forces that apply pressure. Heat the water in a holding tank, before dispersing it.
Hot water pressure cleaner types
The fundamental design is subject to numerous changes. The three key factors to think about are our body type, compressor fuel, and burner fuel.
Type of body
Combo and conversion units are the two primary categories. A combo unit is a single piece of equipment that combines a hot water tank with a regular cold water pressure cleaner on a single chassis. An independent burner known as a conversion unit transforms a typical cold water pressure cleaner into a hot water pressure cleaner.
A hot water-compatible wand and nozzle are still necessary for a conversion unit. Conversion units can either be mobile or stationary.
Kind of motor fuel
The most prevalent fuels are electricity and gasoline. If you require a lot of power or will be operating somewhere without access to electricity, gas-powered motors are a viable option. Electric motors are lighter, require less upkeep, and produce no emissions.
Fuel used in a burner
There are several options, including kerosene, heating oil, fuel, electricity, and liquid propane. While each has advantages and disadvantages, in general, choose a burner according to the materials you have.
Purchasing Factors for Hot Water Pressure Cleaner
Here are a few things to think about if you’re debating buying a hot water pressure cleaner.
Size or weight:
Hot water pressure cleaners are large and powerful. Even a little one might weigh between 300 and 400 pounds. When considering storage and transit, keep that in mind.
Type of fuel:
Fuel type is mostly a matter of taste and compatibility with your present machinery. Any electric-powered washer needs access to energy on the premises or a portable generator.
Conversion vs. combination:
A combo unit is easier to transport around a job site and requires less storage space. If you don’t always require the additional cleaning power of hot water, a conversion burner is more space-consuming but far more practical.
The pressure of water in psi:
The force of the water at the nozzle is measured in pounds per square inch (psi). Although a greater psi is more potent at removing dirt, it is also more likely to harm the cleaned surface. The spray angle of the nozzle also impacts the Psi.
Gallons per minute (GPM) of flow:
More water on the cleaning surface equates to higher water flow. It comes in particularly handy when using a detergent.
Where can I buy a hot water pressure cleaner of the highest caliber?
Make sure you’re obtaining a top-notch, professional piece of machinery before buying. You want to be sure you’re receiving the best value possible for your money given the cost of hot cleaning equipment. You require a pressure cleaner that can heat up quickly, melt grease and oil, and clean any surface. Only one manufacturer regularly provides the best pressure cleaning equipment and the greatest customer service. You need a company with adequate industry experience to understand what you need and how they efficiently deliver it to you.
Jetwave: Grease and oil have no chance.
The hot water pressure cleaners produced by Jetwave are the best available. Our machines provide unmatched power and cleaning ability for a reasonable price, whether you pick gas or electric.
Our website includes detailed information on the characteristics and benefits of each item in our whole line of equipment. Don’t hesitate; cleaning equipment is essential for a successful business. Buy today! Or, for a specific suggestion, check out our list of the finest hot water pressure cleaners.
