Home » What You Should Know About IEEE802.3ah Standard

What You Should Know About IEEE802.3ah Standard

by Steven Brown

Introduction to IEEE802.3ah

IEEE802.3ah is a standard developed by the IEEE for Ethernet over fiber. The standard was released in 2003 and defines how Ethernet can be run over fiber optic cable. The standard supports both full-duplex and half-duplex operation, and can be used for speeds of up to 1000Mbps.

What is the Difference Between Ethernet and IEEE802.3ah?

Ethernet is a network standard that specifies the physical and data link layers of a network. The IEEE802.3ah standard, also known as Ethernet in the First Mile, is an extension of the Ethernet standard that adds support for new physical media and higher data rates.

The main difference between Ethernet and IEEE802.3ah is that IEEE802.3ah offers support for higher data rates and new physical media types, while Ethernet does not. This means that devices which are compliant with the IEEE802.3ah standard will be able to achieve higher speeds than those which are only compliant with the Ethernet standard. In addition, IEEE802.3ah supports longer reach over existing copper infrastructure, making it ideal for deployment in areas where fiber is not yet available.

Advantages of IEEE802.3ah

IEEE802.3.ah standard is the first Ethernet standard to support physical layer (PHY) specifications for Fast Ethernet and Gigabit Ethernet operation on twisted pair cabling. It was approved in June 2003.

The main advantage of this standard is the ability to reuse existing cabling infrastructure for high-speed data networking. This can result in considerable cost savings, since new cabling does not need to be installed.

In addition, IEEE802.3ah supports full-duplex operation, which allows for twice the bandwidth compared to traditional half-duplex Ethernet. This can be especially beneficial for applications that require high bandwidth, such as video streaming or large file transfers.

Disadvantages of IEEE802.3ah

There are a few disadvantages of using the IEEE802.3ah standard, which include:

-It is not compatible with older versions of Ethernet

-It has a limited range

-It is not as widely adopted as other standards

How to Implement an IEEE802.3ah Solution

The IEEE 802.3ah standard is an Ethernet-based standard for Local Area Networks (LANs). It specifies the physical layer and media access control (MAC)layer for point-to-multipoint applications over twisted pair cables. It was approved in December 2004 and published in June 2005.

IEEE 802.3ah defines two types of operations: subscriber mode and provider mode. In subscriber mode, each end station connects to a central device, typically a switch or a hub, through an Ethernet port. The central device controls the access to the shared medium and manages the communication between the end stations. In provider mode, each end station has its own dedicated connection to the central device. This topology is similar to that of conventional Ethernet LANs.

IEEE 802.3ah supports both full-duplex and half-duplex operation. In full-duplex operation, data can be transmitted and received simultaneously on both directions of the link. In half-duplex operation, data can be transmitted and received alternately on both directions of the link but not simultaneously.

The IEEE 802.3ah standard uses the same frame format as conventional Ethernet LANs. The minimum frame size is 64 bytes and the maximum frame size is 1518 bytes. The preamble consists of 8 bytes followed by a start frame delimiter (SFD) of 1 byte. The frame check sequence (FCS) field is 4 bytes long. Each frame starts with

Conclusion

The IEEE802.3ah standard is an important one to know about, especially if you work in the computer networking field. This standard defines Ethernet over a single pair of wires, which is known as EFM (Ethernet in the First Mile). It’s designed for use in access networks and can provide data rates of up to 100Mbps. If you’re looking to get your feet wet with this type of technology, then this standard is a good place to start.

Related Posts

Logo businesspara.com

Businesspara is an online webpage that provides business news, tech, telecom, digital marketing, auto news, and website reviews around World.

Contact us: [email protected]

@2022 – Businesspara – Designed by Techager Team