The Netgear EX8000 Wireless Range Extender provides a way to partially extend your wifi range. It offers the same extremely high bandwidth as the Netgear X6 router and other potent routers. You can increase the range to cover the entire dead zone of your home or workplace without slowing down.
A 2500 square foot home can be covered by a Netgear Nighthawk X6S router due to its greater range. Similar technology can also be found in the Netgear EX8000 extender wireless range extender, which has a similar coverage area. However, 5000 square feet of coverage won’t be achieved by utilizing two range extenders.
Extender Setup for the Netgear Nighthawk X6S AC3000:-
Here’s how to finish the manual Netgear Nighthawk EX8000 setup: –
- Turn on your Netgear Nighthawk AC3000 EX8000 when it’s close to your router.
- After that, join the repeater to a power supply.
- Keep an eye out for the Power LED to turn green.
- Connect a network to the Netgear Nighthawk EX8000 extender.
- Go to mywifiext.net in a web browser on a computer or mobile device.
- It displays the Netgear Genie configuration assistant.
- To connect your booster to the current WiFi network and relocate your extender, follow the on-screen instructions.
- Reposition the repeater close to your router and try again until the Link Status LED turns white if you get no or a terrible connection.
- Once you’ve chosen the best location for your repeater, connect your customer devices to the expanded WiFi network.
How can I set up my Netgear Range Extender EX8000 AC3000 with a push button (wps)?
Follow these steps to setup the Netgear Nighthawk X6S AC3000 (EX8000) using WPS:-
- Turn on the WiFi extender Nighthawk X6S AC3000 EX8000.
- Place both the router and WiFi booster in the same space.
- Next, attach your repeater to a power outlet.
- Watch for the green turn on the power light.
- Press the WPS button on the repeater.
- Your router and booster are correctly connected if the Netgear EX8000 extender Link Status LED is white.
- Your extender’s position should be changed.
- Bring your WiFi-capable computer or mobile device to an area with poor WiFi router coverage.
- With your WiFi-enabled PC or mobile device, join the expanded connection.
The Netgear EX8000 Setup with the WPS button is completed in this manner.
How can I find the latest firmware for the Nighthawk EX8000 X6S AC3000?
Does your WiFi repeater start acting strangely ? Despite a good Netgear repeater setup, is the speed still incomplete? If so, you need to update the Netgear EX8000 extender firmware right away. Integrated inside the hardware is a collection of instructions called Netgear Extender firmware.
- Start by turning on your WiFi extender.
- A router must be connected to the Nighthawk X6S AC3000 repeater.
- Launch your favorite web browser after that.
- In the address area, enter mywifiext.net and press Enter.
- Enter your repeater’s login and password.
- Select the Firmware Update option from the settings menu.
- Select the Check button to finish.
- The firmware can be updated if a new version is available; click yes to do so.
- Wait a short while for the Netgear EX8000 extender firmware to update successfully.
Features of the Netgear EX8000 extender:-
The highest level of AC3000 wireless connectivity ;-
- For providing a 3Gbps connection or more.
- Smart Connect: for securing WiFi connections on all devices (5GHz or 2.4GHz).
- MIMO with multiple connections (MU-MIMO): for simultaneous data streaming connections to all devices.
- For improving streaming and hassle-free gaming, a quad core chip can expand hardwired and wireless connections.
- Frequencies with high performance: for outstanding performance.
- To connect connected devices to your home WiFi network, such as gaming consoles, multimedia streaming set-top boxes, or smart TVs, use Ethernet plugins.
- For connecting your printer, use a USB port.
- Signal strength analytics app for Android devices for network and channel interference optimization.
