Whether or not you wind up with the perfect lighting fixtures for your warehouse depends on a variety of various factors that you must take into consideration. In addition to choosing the sorts of fittings that are suitable for your construction, there are a few aspects that you should also consider about when you are attempting to reduce the number of possibilities that you have available to you when you are trying to narrow down your choices. Have a look at our list of the six most crucial factors to take into consideration before making a decision on the best warehouse lights.
1. A Luminous Quality
The amount of lumens a light bulb possesses is directly proportional to how bright it is, and the more the amount of lumens a light fixture has, the more light it produces. It is advisable to look at the lumen output of a product rather than its watts to determine the number of light fixtures that are required for a certain area. This is because LED lights use fewer watts to provide the same degree of brightness as incandescent or fluorescent lighting. It is of the utmost importance to keep in mind that the lumen output of a lamp should be increased in proportion to the size of the area that is being lighted.
2. Burn Time
The length of time that a light fixture has been turned on and functioning is referred to as its burn time. Between 500,000 and 54,000,000 hours is the typical amount of time a light fixture will remain lit after being installed in a storage facility.
3. Color Temperature
The Kelvin Scale is used to determine this aspect of the color that is produced by the light bulb, which is related to the hue of the color that is produced. A light fixture with a lower Kelvin of 3000K will have a yellower, warmer color than one with a higher Kelvin. On the other hand, a lighting fixture with a higher Kelvin, such as 5000K, will generate a white hue that is more icy and brilliant.
4. Beam Angle
The most effective method for determining whether or not a certain light fixture will work in the area that you have in mind is to examine the beam angle that it provides. When the beam angle is tighter, it produces a more focused beam that illuminates a specific location, such as an entryway, and when the beam angle is wider, it illuminates a bigger area and is therefore more suitable for open areas, such as storage facilities. An entryway is an example of a specific region that can be illuminated when the beam angle is tighter.
5. The Evaluation Provided By The CRI
The Color Rendering Index (CRI) is a statistic that is employed to evaluate a light’s capacity to show natural colors, which assists to retain visibility and contrast with the numerous objects that are present surrounding the area. It would be useful to the functioning of a storage facility or warehouse to install any light fixture that has a CRI of 80 or above. This would allow for better visibility throughout the facility.
6. Dimmable
Purchasing dimmable LED lighting is a terrific way to cut down on the total energy use of your area while simultaneously reaching the required level of illumination. This can be accomplished by investing in new lighting. When utilized at a power level that is less than 100%, LED lights have a smaller impact on the environment than conventional light sources would. Furthermore, their lifespans improve, which can lead to extra cost savings if taken advantage of. Light fixtures found in commercial warehouses typically have 0-10V dimming installed in them so that the lights may be gradually and consistently lowered as needed.
Warehouses That Have LED Light Fixtures Installed In Them
LED lights are well-known for their reduced impact on the environment as a result of their low energy consumption, extended lifespans, and low requirements for maintenance. Keep reading to discover why putting up LED light fixtures in your storage facility is the finest choice you could make in this situation.
Enhanced Efficiency In Production
LED lighting fixtures use a far lower amount of energy to generate the same amount of light as incandescent, fluorescent, and halogen lighting. LED lights have the potential to have an energy efficiency that is up to 90 percent better than that of classic lighting solutions such as halogen and incandescent light bulbs.
Cut Down On The Costs Associated With Your Consumption Of Energy
LED lights, although having a higher initial cost, consume less energy and do not emit heat, which results in savings on utility expenditures throughout their lifetime. In addition, several service providers of utilities give rebates to consumers who purchase energy-saving lighting and install it in their homes.
Longer-Lasting Lighting
LED lights have a lifespan that is measured in the thousands of hours, and many LED light fixtures that are built for use in commercial settings are rated to endure up to 50,000 hours of operation. In comparison to the majority of the other lighting options, they need relatively minimal maintenance because they have such an extraordinarily long lifespan. In addition, given that they do not include any filament, they are an alternative that is also capable of enduring for a longer period.
LED lights have a far longer lifespan than traditional forms of lighting, which means they do not need to be replaced as frequently as other types of lighting. This makes their maintenance quite simple. The procedure of installing or upgrading LED light fixtures is basic and uncomplicated because these fixtures are both lightweight and streamlined in form.
Increased Public Protection And Decreased Negative Effects On The Environment
Light-emitting diodes, often known as LEDs, are the safest and most ecologically friendly kind of illumination that is currently on the market. This is because LEDs do not use mercury or any other potentially harmful compounds. As a consequence of this, they are perfectly safe to handle and throw away, and in many instances, it is possible to recycle them.
